Latest Products https://www.jayceetech.net Latest Products Sat, 24 Jul 2021 16:27:51 +0530 en-us https://www.jayceetech.net Level Switches https://www.jayceetech.net/level-switches.htm https://www.jayceetech.net/level-switches.htm Thu, 09 Jan 2020 00:00:00 +0530 We are reckoned Manufacturer, Exporter and Supplier of Level Switches. The wide gamut of Level Switches that we offer includes Diaphragm Level Switch and Point Level Switches. The range of Level Switches is precisely designed using the cutting-edge technology and the latest equipment. Diaphragm Level Switch https://www.jayceetech.net/diaphragm-level-switch.htm https://www.jayceetech.net/diaphragm-level-switch.htm Level Switches Thu, 09 Jan 2020 00:00:00 +0530 We are highly experienced Manufacturer, Exporter and Supplier of Diaphragm Level Switch. The Diaphragm Level Switch is used for indicating, controlling, and regulating the level of granulated or powdered dry materials with a grain diameter up to 10 mm and a density of 0,3 to 2, 5g/cm3, flowing through a silo, hopper or chute. We offer superior Diaphragm Level Switch that is made up from quality material with perfect finishing. Known for its flawless features, Diaphragm Level Switch is highly in demand among our customers. Operation The device must be mounted so that the diaphragm membrane is exposed to the product whose level should be controlled, in such a way that the product, can press the diaphragm. The material weight presses the diaphragm which is adjusted with the microswitch through a flexible mechanisum. A liver attached to the diaphragm transferrs the pressure to the microswich which changes the contact. When the material recedes the diaphragm comes back to its normal postion and the microswitch again changes the contact. Technical Specifications Normal sensitivity - 100 gm / 500 gm Diaphargm Membrane material - Nitrial Rubber / SS ax. Work ambient temperature - 60 Deg Microswitch contacts - 15 Amp, 230 V AC, Potential free Cable Gland - PG 11 Housing - Cast Al Protection - IP 40 Installation and Mounting The JAYCEEBOOT can be installed outside the container by making a hole on the wall, so that the membrane remains exposed to the product inside. Suspended by means of a tube, it can be also installed inside the container. Using adaptors, it can be installed in pipes and conduits. Wherever possible level switch should be mounted on vertical surfaces. By this means, the product can flow free downwards, and wrong indications are avoided. It can be mounted on surfaces with a slope of not more than 30 degrees from vertical, provided that the product leaves the membrane thoroughly free when flowing along. If maximum levels are to be controlled, the devices must be mounted at such a height that the product overflowing the membrane can exert pressure on this membrane, working the microswitch. Point Level Switches https://www.jayceetech.net/point-level-switches.htm https://www.jayceetech.net/point-level-switches.htm Level Switches Thu, 09 Jan 2020 00:00:00 +0530 We are one of the leading Manufacturers, Exporters and Suppliers of Point Level Switches. The wide array of Point Level Switches offered by us comprises of RF Admittance Point Level Switch, Conductivity Point Level Switches, Vibrating Fork Point Level Switch, Vibrating Fork Point Level Switch and Rotating Paddle Point Level Switch. RF Admittance Point Level Switch https://www.jayceetech.net/rf-admittance-point-level-switch.htm https://www.jayceetech.net/rf-admittance-point-level-switch.htm Level Switches Point Level Switches Thu, 09 Jan 2020 00:00:00 +0530 We manufacture, export and supply a range of RF Admittance Point Level Switch. RF Admittance Point Level Switch encompasses of a specially designed electronics and sensing probe using Driven Shield Coat Guard circuit and corresponding 3-Element Probe. The electro-mechanical combination of the Driven Shield technique in RF Admittance Point Level Switch makes the system immune to the material build-up on the probe and material bridging between the probe and the hopper wall. The RF Admittance Point Level Switch is widely applied in numerous products such as cement, sand, lime, flour, salt, food grains, milk powder, granular, chemical, etc. Salient Features Three Element Coat Guard Technology Can be configured either for High or Low Level point switching Ignores material build-up on the probe Suitable for the highly dusty environment High Reliability Fast and Easy Installation Simple Calibration Field selectable operation logic Provides economical solutions Various models not required Functions The JAYCEEADMITT Point Level Switch comprises of a specially designed electronics and sensing probe using DRIVEN SHIELD-COAT GUARD circuit and corresponding 3-Element Probe. The Electro-mechanical combination of the COAT GUARD technique makes the system immune to the material build-up on the probe and material bridging between the probe and the hopper wall. The unique feature of the system is that the measured signal does not flow to the hopper wall through the probe in the backward direction but flows only through the material. (actual material level) to the hopper wall. Conductivity Point Level Switches https://www.jayceetech.net/conductivity-point-level-switches.htm https://www.jayceetech.net/conductivity-point-level-switches.htm Level Switches Point Level Switches Mon, 15 Feb 2021 00:00:00 +0530 We are known Manufacture, Exporter and Supplier of Conductivity Point Level Switches. The Conductivity Point Level Switches are pioneer work of our expert engineers. The Conductivity Point Level Switches are fabricated using high quality material as per the set industrial standards. Tuning Fork Point Level Switch https://www.jayceetech.net/tuning-fork-point-level-switch.htm https://www.jayceetech.net/tuning-fork-point-level-switch.htm Level Switches Point Level Switches Thu, 09 Jan 2020 00:00:00 +0530 MEASURING SYSTEM The complete system, AQUAFORK-7000â�¦ series, consists of - The sensing probe of Vibrating Fork and The Electronic Switching unit. The vibration of the fork has self-cleaning properties.The light deposit on the container wall does not affect the operation of the AQUAFORK. TECHNICAL SPECIFICATIONS (STANDARD) SWITCHING UNIT Housing - Aluminum, weather proof, powder coated. Integral with the probe suitable for back panel mounting. Cable entry - 2 nos Ambient temperature - 0oC to +60oC Power consumption - 2 VA Mains Voltage - 230/110 V AC (+/-15%), 50 Hz,or 18 to 55 V DC or 65-265 V AC Output - 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads or PNP/NPN Switching delay - Continuously adjustable From 2 to 20 sec. probe free or probe covered. Safety operation - Field selected switch over for min. or max. (FSL/FSH) switching points. Switch status display - Green LED shows Normal, Red LED shows alarm. FORK (SENSING PROBE) Mounting - Screwed - 1 â�� BSP (standard) Or Flanged (optional) Sense Fork, Stainless steel Extension Pipe Length - 120 mm (standard) upto 3000 mm and as per application. Operating Temp - 150 deg for the integral switching vessel unit (standard). Rotating Paddle Point Level Switch https://www.jayceetech.net/rotating-paddle-point-level-switch.htm https://www.jayceetech.net/rotating-paddle-point-level-switch.htm Level Switches Point Level Switches Sat, 30 Jan 2021 00:00:00 +0530 Application : JAYCEEROTO heavy duty, rotary paddle switches are the most suitable for level detection of dust granules and other free flowing solids up to the particle size of Ø10 mm. Mounted in bins, silos and hoppers it can be applied for control of level, filling and emptying as well as for protection against overfilling.   Main Application Areas : Agriculture : beet slice, hard crop, Chemical industry: plastic powders, granules, pellets Food industry : sun flower, sun flower cod, Building industry: sand, calcium powder, gypsum, coffee and cacao powder, flour, sugar, etc. Energetic: active soot, coal powder, fly ash.   Number and material of vanes Specific gravity and particle size of the material provides orientation for the number of vanes. Most commonly used is the stainless steel, single vane blade. The lowest specific gravity for this paddle is 0,4 kg/dm3. For lighter materials the use of 3- or 4-vane paddle is recommended.   PROBES Standard probe length : 150 mm. Longer length up to 3 m. Construction and length of the probes would depend upon the application. Various types of probes:, Rigid and Flexible available.   Model: 6010 – 110V AC 6020 – 24 V DC 6030 – 230 V AC 6500 – Detection of solids under water, water columns 10mtr. The suffix will be same as above. 6510 – 110 V AC 6520 – 24 V DC 6530 – 230 V AC Flow Meters https://www.jayceetech.net/flow-meters.htm https://www.jayceetech.net/flow-meters.htm Thu, 09 Jan 2020 00:00:00 +0530 We are one of the recognized Manufacturers, Exporters and Suppliers of Flow Meters. The wide range of Flow Meters comprises of Electromagnetic Flowmeter and Ultrasonic Flowmeters. The flawless range of Flow Meters is designed by our expert and professionals accurately as per the international standards. Electromagnetic Flow Meter https://www.jayceetech.net/electromagnetic-flow-meter.htm https://www.jayceetech.net/electromagnetic-flow-meter.htm Flow Meters Thu, 09 Jan 2020 00:00:00 +0530 Don’t you want to make your convenient and efficient? Of course yes! This is the answer you will get from every person around you. Many of us are finding such equipment that lasts long, cost less, easy to implement, and fast to work. Jayceetech manufactures, supplies, and exports, all such mechanical parts as well as small machines and equipment. We are easy Electromagnetic Flow Meter supplier in India that reaches it users in the minimum possible time.Electromagnetic Flow MeterMajor applications of our Electromagnetic Flow Meter are for water supply network, chemical and process industries, pharmaceutical industries, waste water management, sugar, food and beverages industry, effluent treatment plants and for other similar processes. Salient features of our Moisture Sensors for Hopper and Conveyor For installation, users will require in line flanged mounting. For creating display units, all standard engineering units are considered. Display version is available in integral or remote and for this, we fit 2 lines LCD in it. Normal diameter of the product will be 15 to 2000MM. We use hard rubber or PTFE for sensor lining and SS 316 standard electrode material in the product. It can handle working pressure of 10 KG per centimeter while the working temperature requires Integral PTFE-120. The product requires 24 V DC power supply for smooth and efficient operations. For remote access, a cable length of 10 meter is required. Safety is a measure concern for us. We use IP-67 protection glass for transmitter in order to avoid damages to the product as well as users. GeneralAbove specifications are common in all electromagnetic flow meter. Users can entertain slight variation for different designs and being the best Electromagnetic Flow Meters manufacturer in India, it is our duty to furnish the exact technical specification for our linked products. Users can expect an average output of 4 to 20 MADC per RS 485 along with the repeatability of 0.2 of span. In the product, measuring tube material is SS304 non-magnetic while CS is used as sensor housing material connected at end of flanged, wafer or SMS. According to the needs and requirement of customers, we modify the technical specifications.We are very flexible in our work and that is why we are liked by all users. This way, Jayceetech is gradually becoming the best Electromagnetic Flow Meter supplier in India. We also entertain the special requisitions and orders of our customers. Our professionals provide the solution for complex to complex problems. Our team members are backed by the rich industry experience and use this experience while designing these tech products.Electromagnetic Flow Meter is basically used as the connector. And if this connector doesn’t work well, the whole process disturbs. So, don’t throw yourself in all cheap material just only to save cut your cost. We recommend people to buy the product from Jayceetech where you can save time as well as cost. Also, you can easily reach this platform online and shop!Applications Water Supply Network Chemical and Process Industries Pharmaceutical Industries Waste- Water Management Sugar, Food and Beverage Industries Effluent Treatment Plants Ultrasonic Flow Meter https://www.jayceetech.net/ultrasonic-flow-meter.htm https://www.jayceetech.net/ultrasonic-flow-meter.htm Flow Meters Thu, 09 Jan 2020 00:00:00 +0530 No work will be such fine in big industries if we don’t use quality machines and equipment! Investing in the machines is one-time investment, no matter it is small or big. We all expect long duration and smooth operation of equipment when we use them. Integrating all these points, Jayceetech made a team of professionals that works towards the best tech products for industry use. Gradually, we are being the synonym of quality and accuracy. All results are displayed on the virtual screen though.Ultrasonic Flow MeterOur Ultrasonic Flow Meter has bi-directional velocity, and this idea makes the product very useful and easy to work. Jayceetech is the prominent Ultrasonic Flow Meter supplier in India which is backed by the industry’s best professionals. It has a set timer that tracks the smooth working and accuracy as well as the checking of repetition during the operation of the product. Jayceetech is the finest Ultrasonic Flow Meters manufacturer in India.Salient features of our Ultrasonic Flow Meter Our product has compatible size to apply to all industries. It is not only easy to install but also smooth to use and operate. The basic concept of technology used in the product is non-invasive clamp. The product is customizable and incorporates various kinds of portability features. No complain of faults! Users will get no issue of pressure drop, moving parts, leakage or corrosion. Also, there are no chances of pipe cutting or process interruption by any other means. Wide Bi-directional flow range is available along with Independent measurement of fluid properties. GeneralAlong with above interesting features, we also describe technical specifications for our products. In our catalogue, viewers will get different designs of products along with its technical specifications and price ranges. That is why, we are the best Ultrasonic Flow Meter supplier in India.Two bundles of flexible are available in our Ultrasonic flow meter. We are broad level Ultrasonic Flow Meters manufacturer in India and provide small, medium, and large category equipment. Pipe size of small, medium, and large transducer is 12 to 50MM, 40 to 1000MM, and 1000 to 4570MM respectively. According to its size and usages, transducer is molded in different weights and dimensions. Slight variation in sensitivity and repeatability is seen. A strict security and safety measures are incorporated in the products. It provides the option for keypad lock and enables access code when required. The set temperature for standard is 400C to 121OC and high temperature is 400C to 250OC for liquid. The product has insertion 4LCD, 16 characters LCD with back light flow rate, velocity, and totalizer. For 12 hours of operation, the product requires 100 to 240 V AC power supply through charger.Products of Jayceetech are available both online and offline. For visiting different designs, we advise viewers to download our catalogue and handbook. Both the books are available without any cost. Also, we provide warranty for one year to three years for our product depending upon the design.Salient Features Portability Compact Size and easy to use Non-invasive Clamp-on Technology/li> Wide Bi-directional Flow range Measurement independent of Fluid properties No pipe cutting or process interruption No pressure drop, moving parts, leakage or corrosion Level Transmitters https://www.jayceetech.net/level-transmitters.htm https://www.jayceetech.net/level-transmitters.htm Thu, 09 Jan 2020 00:00:00 +0530 We are recognized Manufacture, Exporter and Supplier of Capacitance Level Transmitters, Fuel Level Transmitter, Ultrasonic Level Transmitters and Radar Level Transmitters. The Level Transmitters are developed using state-of-the-art manufacturing facilities with high-grade material. Capacitance Level Transmitter https://www.jayceetech.net/capacitance-level-transmitter.htm https://www.jayceetech.net/capacitance-level-transmitter.htm Level Transmitters Thu, 11 Feb 2021 00:00:00 +0530 Jayceetech has designed the Fuel Level Transmitter to apply to every kind of fuel and similar products. It includes, water, chemicals,  diesel, kerosene, and oil. Nothing to worry about the product quality and cost for all industry-usable products because Jayceetech is now available everywhere to cater the market needs. General Prominent Fuel Level Transmitters supplier in India, we inculcated the best technical specifications considering the global standards. Our design incorporate  Rod, Rope and Co-axial pipe,of stainless steel with PTFE insulation. Accuracy is 1.5mm. As we consider not only the problems but also the demand of the market for designing our products that’s why we are getting the fame as the finest Fuel Level Transmitters manufacturer in India. Complementing the needs, our experienced designers have come up with the different models of Fuel Level Transmitters. All the model numbers are specifically defined in our flipbook . The most common models are Captrance 5105, Captrance 5120, Captrance 5485, and Captrance 5110. Models have different technical specification and different usages. Users are advised to buy the products after specifying their needs. Our assistants are available clock-around to guide the customers. For this, users will have to raise the requisitions in the form of query mail or advice-seeking call. Reach the best  Level Transmitters supplier in India! Check the designs online by downloading catalogue and flipbooks. Jayceetech thrives to deliver the best quality products across the globe in order to be the best manufacturer as well as the best supplier just reach us, we will give you the required tech product within a few clicks. Fuel Level Transmitter https://www.jayceetech.net/fuel-level-transmitter.htm https://www.jayceetech.net/fuel-level-transmitter.htm Level Transmitters Thu, 11 Feb 2021 00:00:00 +0530 Capacitance Level Sensor/Transmitter (FUELTRANCE) is a compact, low cost microcontroller based level transmitter with analogue output designed to measure the level of various non viscous, non conductive fuel oils, such as Diesel. Measuring range is 0.2 to 3 M for rod probe version. The probe forms an electrical capacitor with the grounding still well, provided on the sensing rod. An initial capacitances exists between the electrode and the steel well. When the probe become covered with material to be measured the capacitances will increase and change will be measured and converted into an analogue output signal proportional to the level change. Features Fast and Easy Installation Pre calibrated for each probe length (sight calibration possible, easy). No effect of terbulance in the tank.   High Reliability Suitable for the highly dusty environment. Provides economical solutions.   Applications Fuel Level Sensor capacitance fuel trance is designed for diesel. Fuel Level measurement in fuel tank of vehicles and stationary units. Liquid Applications : Oil, Diesel, etc Moisture Measurement Meter https://www.jayceetech.net/moisture-measurement-meter.htm https://www.jayceetech.net/moisture-measurement-meter.htm Thu, 09 Jan 2020 00:00:00 +0530 We are one of the leading Suppliers of Moisture Measurement Meter. Flush mount, digital, microwave Moisture Measurement Meter is accurately designed following the set industrial parameters. The Hydro-Mix VII is a rugged, microwave Moisture Measurement Meter designed to be installed flush with the floor of a mixer, chute or conveyor in process control environments. Reading at 25 times per second and combined with on-board functionality such as signal processing, smoothing and averaging, the Hydro-Mix VII Moisture Measurement Meter accurately measures the moisture content of material as it passes over the ceramic faceplate. Remote configuration, calibration, diagnostics and firmware upgrades are simple using Hydronix Hydro-Com software. The linear output allows direct integration with any control system using industry standard interfaces. Features Digital technology provides precise linear moisture measurement. Advanced Digital Signal Processing provides a clear signal with rapid response. Choice of measurement modes for optimizing sensor performance in a variety of applications and material types Fully temperature compensated measurement. Two analogue outputs, digital RS485 communications and configurable digital input/outputs. Fast response to changing conditions with 25measurements per second Remote communication with Hydro-Com software allows configuration of all sensor parameters including selection of sensor outputs, graphic traces of outputs, calibration of sensor readings and firmware upgrades. Consistent performance with no need for recalibration except for use with different materials Tough and reliable with proven track record Easily replaced ceramic faceplate and protection ring Moisture Measurement In Bulk Materials ( Hydroprobe-II ) : The ultimate intelligent microwave sensor for measurement of moisture in sand and free flowing solid materials in bins Range of moisture : For bulk materials the sensor will measure up to the point of saturation typically 0-20% for construction materials Penetration : Approximately 75-100mm dependent on material Power supply : +15Vdc to +30Vdc. 3 watts max Refresh rate : Outputs are updated approximately 25 times per second Analogue output : Configurable 0-20mA or 4-20mA current loop source For 0-10Vdc output an external 500R load resistor should be connected across the analogue output at the control system Discrete inputs : The batch average start and stop or moisture/temperature multiplexing functions can be controlled via the digital inputs, Refer to 'Connecting the Cable' section of the manual for more information. Digital Communications : Up to isolated RS485 2-wire port Float Level Switches https://www.jayceetech.net/float-level-switches.htm https://www.jayceetech.net/float-level-switches.htm Thu, 09 Jan 2020 00:00:00 +0530 Specifications: Housing :Cast Aluminium, weatherproof Mains : 12 V DC to 30 V DC Current Consumption : 20 mA(max) Responce Time : better than 10 sec Accuracy : better than +/- 0.5% typical Operating Temp. : 20 to + 60 °C Signal output : 0 to 5 V DC or 10 VDC , RS485/ 4-20 mA DC Setting : Push Button, Digital SENSING PROBE- Mounting :Screwed 3/4  BSP (standard) Or Flanged (Optional) Sense : Pipe / Rod stainless steel (SS 304) Grounding : Pipe, SS 304 Length : 200 (standard) up to 2000 mm Accuracy : 4 mm standard 2 mm special version Operating Temp in : 70 deg for the integral unit (standard) Application: Fuel Level Sensor capacitance fuel trance is designed for diesel. Fuel level measurement in fuel tank of vehicles and stationary units. It is prohibited to use fuel trance for level measurement of electrically conducting liquids (e.g. water) vibrating fork level limit switch for food grains https://www.jayceetech.net/vibrating-fork-level-limit-switch-for-food-grains.htm https://www.jayceetech.net/vibrating-fork-level-limit-switch-for-food-grains.htm Sat, 30 Jan 2021 00:00:00 +0530 Jaycee started in 2000 starting with manufacturing of vibrating tuning fork level switches for solid with various outputs suiting control requirements. also manufacturing vibrating fork/tuning fork level switches for liquid applications. In addition, the manufacturing range include vibrating rod level switches and capacitance level transmitter or switches, rf admittance level switches, near rf admttance level swiches, rotating paddle level switches, conductivity based level switches , capacitance level switches and capacitance rf level transmitters, fuel level sensors and transmitters. And in 2012 introduced electromagnetic flow meters. products designed and manufactured by Jaycee conform to various international quality standards. Tunning Fork Level Switch for Very Light Powder https://www.jayceetech.net/tunning-fork-level-switch-for-very-light-powder.htm https://www.jayceetech.net/tunning-fork-level-switch-for-very-light-powder.htm Sat, 30 Jan 2021 00:00:00 +0530 Jaycee started in 2000 starting with manufacturing of vibrating tuning fork level switches for solid with various outputs suiting control requirements. Swift is configured for both solids as well as liquids. For solids it is configured for amplitude mode and for liquids it is configured for frequency mode. also manufacturing vibrating forktuning fork level switches for liquid applications. In addition, the manufacturing range include vibrating rod level switches and capacitance level transmitter or switches, rf admittance level switches, near rf admttance level swiches, rotating paddle level switches, conductivity based level switches , capacitance level switches and capacitance rf level transmitters, fuel level sensors and transmitters. And in 2012 introduced electromagnetic flow meters. products designed and manufactured by jaycee conform to various international quality standards. RF Admittance Level Sensor Switches https://www.jayceetech.net/rf-admittance-level-sensor-switches.htm https://www.jayceetech.net/rf-admittance-level-sensor-switches.htm Thu, 11 Feb 2021 00:00:00 +0530 Housing : Aluminium, weatherproof IP 67, powder coated , integral with the probe mounting Cable Entry : 1 no.s (standard) Ambinent temperate : 0 to 60 Deg c , Mains Voltage : 18 to30 VDC, Output : PNP NO/NC or Relay ,Operating Freguency : 6 KHz / 110 KHz , COAT GUARD SENSING PROBE: Mounting : Screwed BSP (standard) Or Flanged (optional) or as per specification. Sense rod : Stainless steel Shield : Stainless steel Insulation : PTFE (standard)Other on request and as per application. Operating Temp in :100 deg for the integral switching vessel unit. For higher temp remote switching unit(please consult works)   THEORY: The RF level switch operates on the basis of RF absorption measurement. The electronic unit generates a sinusoidal wave, applied to the electrode creating a field around it. RF environment absorption changes (electrical loss) around the electrode are reflected on changes of generator supply current. Such changes, caused by the increase in level is amplified and used to energies the relay. The main drawback of the conventional method is that after the level has once increased and then decreased, there may be a coating left on the probe which is sensed by the instrument as though the level is still on the probe. In JAYCEEADMIT a COAT GUARD and Trance-Conductance amplifier are incorporated in the circuit having its output exactly at the same voltage and phase at all times as its input. The output is connected through the shield of the low capacitance co-axial cable to the concentric tube on the sense probe, called shield element. Since both the elements, sense and shield are exactly at the same potential and phase at all times, there is no current flow through the cable. Thus there is no change in calibration due to coating on the probe and the temperature effect of the cable. Vibrating Fork Level Sensor Switches https://www.jayceetech.net/vibrating-fork-level-sensor-switches.htm https://www.jayceetech.net/vibrating-fork-level-sensor-switches.htm Thu, 09 Jan 2020 00:00:00 +0530 Technical Specification: Housing : Steel Aluminium, weatherproof , powder coated , integral with the probe Cable Entry : In cast Al Housing 2XPG 13 Ambinent temperate : 0°C to + 60°C Power consumption : 0.3 VA Mains Voltage : 18 to30 VDC or 65 to 265 VAC std. Output : PNP or NONC and DPDT in cast Al Housing Switching delay : Continuous adjustable from 1 to 20 sec. probe free or probe covered (in cast Al version). Safety operation : Field selected switch over for (In Cast Al Version) min or max PNP Output Switch status display : Green LED shows Normal, Red LED shows alarm. FORK (SENSING PROBE): Mounting : Screwed BSP (standard) or flanged (optional) Sense : Fork, Stainless steel Extension : Pipe (optional) in extended type Length : 200 mm up to 3000 mm and as per application Operating Temp in : 150°C for the integral switching vessel unit.200°C optional Models: HARP 2010 :120hz frequency, weatherproof IP 67 cast Al housing with universal mains.18-30 V DC and 65 to 265 VAC. 1 DPDT relay output HARP 2020 : 120hz frequency, weatherproof IP 67 cast Al compact housing. PNP DC output. HARP 2030 : 120hz frequency, weatherproof IP 68 C steel Pipe housing. PNP DC output. HARP 2020 Ex. : 120hz frequency, weatherproof IP 65. Flameproof as per BIS standard vide CIMFRTcsRH642 DT 16tA2t20 (In PNP version) and PESO certificate no APHQMH1042738(P302245) Electronic Rotating Paddle Sensor https://www.jayceetech.net/electronic-rotating-paddle-sensor.htm https://www.jayceetech.net/electronic-rotating-paddle-sensor.htm Thu, 09 Jan 2020 00:00:00 +0530 Micro controlled based electronic Paddle Level Switch. Housing : Aluminium, weatherproof , powder coated. Integral with the probe Cable Entry : 2 nos. Mains Voltage : universal 65 to 260 V AC , 50 Hz /24 V DC Output : 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non- inductive loads. Insertion length : 150 mm standard, Ambient temperature : Power Consumption : 8.1 VA Fail safe : Selectable for High or Low Mounting :Screwed BSP ( standard) Or Flanged (Optional) Sense rod : Stainless steel, 12mm DI Paddle : 1-4 , paddles depending upon application. Operating Temp. In : 80 for the standard units. 200 beet slice, hard crop Chemical industry : Plastic powders, granules, pellets Food industry : Oil seed, food grains Indusry : sand, calcium powder, gypsum, cofee and cocoa powder, flour, sugar, etc. Energetics: soot, coal powder, fly ash. Salient Features: No cluch, no gear , no spring. Flexible coupling (optional as per application). Robust, dust and watetight housing. Extended probe possible. Extended life by motor shut off design Sealed bearing. Interchangeable paddle assembles. Torque adjustable low, medium & high as per medium. Fail safe switch selectable. 2 relay output each 1 SPDT. Building industry materials, cement, sand,lime, etc. Foodstuff industry , milk powder, flour, salf, food grains, etc. Plastics industry, powder,granular,fruit slice etc. Timber industry, chemical and mining. Boot Level Detector Diaphragm Switch" https://www.jayceetech.net/boot-level-detector-diaphragm-switch.htm https://www.jayceetech.net/boot-level-detector-diaphragm-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 Jayceetech boot level switch is a diaphragm switch, designed for use with free flowing, dry granular material stored in bins, silos or hoppers. Mounted from outside of the bin. The diaphragm can be of neoprene rubber or steel depending upon the application. the diaphragm switch is used for detection of level in bucket elevator boot and can be used for detecting high, intermediate or low levels of material food grains, sand etc RF Admittance Level Switch https://www.jayceetech.net/rf-admittance-level-switch.htm https://www.jayceetech.net/rf-admittance-level-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 Jayceetech is leading manufacture of RF Admittance, level switch, capacitance Level Switch in India. Admittance is suitable for both solid and liquid. Also Suitable for side as well as top mounting. Capacitance have many uses in process industry sector. RF Admittance Level Switches manufacturer in India. Also, are reaching the global market gradually, and are catering need of market application and provide solution.Salient features of our RF Admittance Level Switch We use three-element Coat Guard Technology in these switches. It has facility to configure either for high or low level point switching. Our product also remains the same and works well even in the highly dusty environment. The product is suitable for wide range of temperature even the conductive and nonconductive application. The product is not only cost-friendly but also equally reliable. Along with its simple calibration, our switch product is easy to install and easy to use. Users will not require any additional or use of various models after installing our RF admittance level switches. Our design ignores the material build-up on the probe in order to operate smoother. GeneralBeing the prominent RF Admittance Level Switches manufacturer in India, we provide the economical solution to all problems. The above list of characteristic of our product is just comprehensive; it is not an exhaustive list. We have much more in the product. Our standard designed RF admittance level switch can handle maximum temperature up to 200 degree Celsius and maximum pressure up to 10KG per square centimeters (for respective probe construction). We have design up to 650 Deg C application suitability. The insertion length of this product varies from 150mm to 3000 mm.We are the fastest RF Admittance Level Switches supplier in India. We are easily reachable as we are available online. Customers can find our products anytime from anywhere. Our professionals design products after researching market and customer needs. They see the practical problems in depth, and give a solution by upgrading the products and serving the same to customers.We have given technical specifications for each product. Customers can choose the right product for them. You can get more details about our products from our website Jayceetech.com. We are growing rapidly and have customers all over the world. Applications Fertilizer, Cement, Tyre, Chemical and Food Industry Breweries, Sewage Treatment Plants. Salient Features Three Element Coat Guard Technology Can be configured either for High or Low Level point switching Ignores material build-up on the probe Suitable for the highly dusty environment High Reliability Fast and Easy Installation Simple Calibration Field selectable operation logic Provides economical solutions FunctionsThe JAYCEEADMITT Point Level Switch comprises of a specially designed electronics and sensing probe using DRIVEN SHIELD-COAT GUARD circuit and corresponding 3-Element Probe. The Electro-mechanical combination of the COAT GUARD technique makes the system immune to the material build-up on the probe and material bridging between the probe and the hopper wall. The unique feature of the system is that the measured signal does not flow to the hopper wall through the probe in the backward direction but flows only through the material. (actual material level) to the hopper wall. Chute Jamming Detection Switch https://www.jayceetech.net/chute-jamming-detection-switch.htm https://www.jayceetech.net/chute-jamming-detection-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 We are offering chute jamming detection switch jayceetech is offereing rf-admittance point level switch, with active shield compensation probe and corresponding ota based electronic , which ignores the coating built-up of sticky conductive and non condctuve bulk material on the probe. RF-admittance level limit switch mostly used for the material having tendency to build-up on the tank/hopper/solo wall and sensing probe. jayceeadmitt series admittance level switch having three element probe ignores the build up on the probe . An ota based electronic circuitry have ability to sense the very low dielectric material like fly ash and clinker dust at very high temperature operating temperature. Remote electronics version also available. Fuel Level Sensor Transmitter https://www.jayceetech.net/fuel-level-sensor-transmitter.htm https://www.jayceetech.net/fuel-level-sensor-transmitter.htm Thu, 09 Jan 2020 00:00:00 +0530 We are offering fuel level sensor transmitter jayceetech fueltrance is a capacitance level transmitter, a compact, low cost, level transmitter with analogue output designed to measure the level of various non viscous, non conductive fuel oils, such as diesel. Measuring range is 0.2 to 2 m for rod probe version. The probe forms an electrical capacitor with the grounding stell well provided on the sensing rodwith the vessel empty, an initial capacitances exists between the electrode and the metal well or the auxiliary reference probe. When the probe become covered with material to be measured the capacitances will increase and the change will be measured and covered into an analogue output signal proportional to the change. It is pre-calibrated for specified length. Conductivity Level Switch https://www.jayceetech.net/conductivity-level-switch.htm https://www.jayceetech.net/conductivity-level-switch.htm Fri, 12 Feb 2021 00:00:00 +0530 Nothing to worry about the product quality and cost for all industry-usable products because Jayceetech is now available everywhere to cater the market needs.   General Prominent Fuel Level Transmitters supplier in India, we inculcated the best technical specifications considering the global standards. Our design incorporate  Rod, Rope and Co-axial pipe,of stainless steel with PTFE insulation. Accuracy is 1.5mm. As we consider not only the problems but also the demand of the market for designing our products that’s why we are getting the fame as the finest Fuel Level Transmitters manufacturer in India. Complementing the needs, our experienced designers have come up with the different models of Fuel Level Transmitters. All the model numbers are specifically defined in our flipbook . The most common models are Captrance 5105, Captrance 5120, Captrance 5485, and Captrance 5110. Models have different technical specification and different usages. Users are advised to buy the products after specifying their needs. Our assistants are available clock-around to guide the customers. For this, users will have to raise the requisitions in the form of query mail or advice-seeking call.   Reach the best  Level Transmitters supplier in India! Check the designs online by downloading catalogue and flipbooks. Jayceetech thrives to deliver the best quality products across the globe in order to be the best manufacturer as well as the best supplier just reach us, we will give you the required tech product within a few clicks.   Rotating Paddle Level Switch https://www.jayceetech.net/rotating-paddle-level-switch.htm https://www.jayceetech.net/rotating-paddle-level-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 Rotating Paddle Level Switch is used in different fields. Main applications of rotating paddle level switch are in agriculture, chemical industry, food industry, building industry.Details                      Users will also get the flexible coupling in our product as per application. Various lengths are available. The product has designed in such way that it is not only robust but also contains the features of dust and watertight housing. GeneralRotating Paddle Level Switch is used mainly for slice, beats, cutting hard crops, managing plastic powders, Granules, and Pellets, for sun flower, sun flower cod, sand, calcium powder, Gypsum, coffee and coco powder, flour, sugar, active soot, coal powder, fly ash, etc. By the time, Jayceetech is rapidly growing as the leading Rotating Paddle Level Switches manufacture in India due to its quality products at the least prices. We are also available to resolve query pertaining to application.Salient Features Level switch for powders and free flowing solids Flexible coupling (optional as per application) Extension up to 3 m Robust, dust and watertight housing Extended life by motor shut off design Sealed bearings Interchangeable paddle assemblies Magnetic Clutch mechanism Microwave Moisture Measurement Sensor https://www.jayceetech.net/microwave-moisture-measurement-sensor.htm https://www.jayceetech.net/microwave-moisture-measurement-sensor.htm Thu, 09 Jan 2020 00:00:00 +0530 The microwave moisture measurement sensor is designed to measure the level of moisture and water in thin layers. The series of microwave moisture measurement sensors we offer at Jaycee Technologies Pvt. Ltd. in Pune comes at a low cost and runs on a single frequency so the moisture content is determined quickly and in a non-destructive way. Buy Microwave Moisture Measurement Sensor in Pune Our microwave moisture measurement sensors adhere to the free-space transmission measurement principle of the dielectric properties. The sensors we offer give you precise and trustworthy moisture measurements on a plethora of applications. For the sake of high basis weight, the sensors we provide are optimised. Besides, they also abide by the exclusive properties of microwave technologies so they pierce through the thick material layers. Ultrasonic Level Meter https://www.jayceetech.net/ultrasonic-level-meter.htm https://www.jayceetech.net/ultrasonic-level-meter.htm Thu, 09 Jan 2020 00:00:00 +0530 The distance is measured by the ultrasonic level meters with the help of ultrasonic waves. The ultrasonic level meter we provide at Jaycee Technologies Pvt. Ltd is the only meter that uses the largely popular GAP technology to identify the accurate echo. Our product uses little GAP at every distance that is present within the measurement range. Get Low-Cost Ultrasonic Level Meter You can expect our ultrasonic level meters to run even in polluted environments. There is no need to clean the transducer face, as it does the job itself. The product is designed to operate both through heavy vapour and smoke. Unlike other ultrasonic level meter suppliers, we ensure our product works in narrow vessels, thanks to the power technology, amplitude, and GAP dynamic gain. Ultrasonic Open Channel Flow Meter https://www.jayceetech.net/ultrasonic-open-channel-flow-meter.htm https://www.jayceetech.net/ultrasonic-open-channel-flow-meter.htm Thu, 09 Jan 2020 00:00:00 +0530 Vortex Flow Meter https://www.jayceetech.net/vortex-flow-meter.htm https://www.jayceetech.net/vortex-flow-meter.htm Thu, 09 Jan 2020 00:00:00 +0530 Level Sensor https://www.jayceetech.net/level-sensor.htm https://www.jayceetech.net/level-sensor.htm Thu, 09 Jan 2020 00:00:00 +0530 Level sensors are manufactured for the monitoring, upkeep, and measurement of liquid levels. The data perceived after liquid level detection is converted into an electric signal by the level sensor. Our premier level sensors at Jaycee Technologies Pvt. Ltd provides level sensors to automatic industries. Top-Class Level Sensor Manufacturers When you choose level sensors from us, the level of a medium inside a silo or tank is continuously measured by it. The sensor commissioning can be availed directly on the sensor using a laptop, tablet, or even a smartphone with the help of Bluetooth. The level sensors we offer monitor permanently the critical measured values and the parameters of the instrument. Aqua Fork Point Level Switch https://www.jayceetech.net/aqua-fork-point-level-switch.htm https://www.jayceetech.net/aqua-fork-point-level-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 Models HONEYBEE 7210 - 2Khz frequency, Weather proof IP 67Cast Al housing. With universal mains. 18-30 V Dc and 65 to 265 V AC. 1 DPDT relay output. HONEYBEE 7220 - 2Khz frequency, Weather proof IP 67 Cast Al compact housing. PNP DC output HONEYBEE 7230 - 2Khz frequency, Weather proof IP 68 C Steel Pipe housing. PNP DC output HONEYBEE 7220 Ex - 2K Hz frequency, Weather proof IP,65, Flameproof as per BIS standard vide CIMFRTc/sR/H642 DT16tA2t20 and PESO certificate no A/P/HQ/MH/104/2738(P302245) Clamp On Type Flow Meter https://www.jayceetech.net/clamp-on-type-flow-meter.htm https://www.jayceetech.net/clamp-on-type-flow-meter.htm Thu, 09 Jan 2020 00:00:00 +0530 Salient Features : Portability Compact Size and easy to use Non-invasive Clamp-on Technology No pressure drop, moving parts, leakage or corrosion Measurement independent of Fluid properties No pipe cutting or process interruption Wide Bi-directional Flow range Guided Wave Radar Level Meter https://www.jayceetech.net/guided-wave-radar-level-meter.htm https://www.jayceetech.net/guided-wave-radar-level-meter.htm Thu, 09 Jan 2020 00:00:00 +0530 FEATURES Suited to continuous level mesurement of various liquid, mush and bulk-solid materials. Universal use, direct mounting into containers, silos, vessels, reservoirs, etc. Stainless steel rod or rope electrode Measuring range up to 40m Linear measurement in non-conductive and in differently shaped containers Quick view measured values on the display Simple installation and setting Current output (4 ... 20 mA), HART® protocol   Features of variants GRLM–70_–00 without electrode, the electrode is made by customer (only variant 10 or 30) and connected to the electrode junction by M8 thread. GRLM–70_–10 Uncoated stainless steel rod electrode, for level measurement liquids and bulk solid materials (water, water solutions, emulsion, oils, diesel, flour, sand, granulates, etc.). Maximum electrode length 8 m. GRLM–70_–11 Fully coated stainless steel rod electrode (PFA Teflon®), for level measurement of aggressive liquids and very pure liquids. Maximum electrode length 2 m. GRLM–70_–12 Fully coated stainless steel rod electrode (FEP Teflon®), for level measurement of aggressive liquids and drinks. Maximum electrode length 2 m. GRLM–70_–20 Uncoated stainless steel rod electrode with reference tube, for accurate level measurement of liquids in cramped spaces. Maximum electrode length 3 m. GRLM–70_–30 Uncoated stainless steel rope electrode and weight, for level measurement of liquids and bulk solid materials (water, grains, sand, flour, cement, etc.) in higher silos, vessels, reservoirs. Maximum electrode length 40 m. GRLM–70_–32 Fully coated stainless steel rope electrode and coated weight, for level measurement of aggressive liquids and very pure liquids. Maximum electrode length 12 m. GRLM–70_–33 Uncoated stainless steel rope electrode with anchorage, for level measurement of bulk solid materials (grains, flour, cement, etc.) in higher silos, vessels. Maximum electrode length 40 m. Magnetic Float Level Switch https://www.jayceetech.net/magnetic-float-level-switch.htm https://www.jayceetech.net/magnetic-float-level-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 Magnetic Float Level Switches are applicable for various type of liquid in water treatment, Filtration system, pump house & cooling tower application.Details Our magnetic float level contains hermetically sealed glass encapsulated reed switch. The product is user-friendly and gives various options to customers. User can opt for various models. Also Available for hazardous application. GeneralApart from the above basic features, our Magnetic Float Level Switch for liquids can handle maximum temperature up to 80 degrees Celsius and pressure up to 10 KG per square centimeter. Different options of the product include intrinsically safe small, large, and multiple floats and in-suite test devices. All the products and its parts are under warranty. So, users can choose the same considering their regular or casual needs.Most of the products, including Magnetic Float Level Switch, provided by Jayceetech are multi-purpose. We are well-known Magnetic Float Level Switches manufacturer in India. So, whatever is our customers’ demand, we are duty-bound to fulfil the same in the given time frame. We have efficient staff members as well as technical people who work day and night to facilitate the world in the best possible way. So, users can rely on our products with no element of doubt and tension. We also provide a complete guide along with every product of Jayceetech so that customer can use it with full confidence.In order to make your work simpler, choose the products of jayceetech.com at your doorsteps. Yes, we are also available online. So, buying from anywhere is possible with jayceetech products has become easier. List your requirements and choose the best product in the market by option the best Magnetic Float Level Switches supplier in India.We have a special catalogue section for the different design livers. Customers are requested to check our different design in the catalogue along with the prices before buying magnetic float level switches. Keep jayceetech products around you and use them perfectly to get the best results in your field. We are just here to support and cater your needs with our finest work!Applications High and Low Alarm in Process Tanks. Water Treatment and Filtration Systems. Pump and Cooling Circuit Protection. Salient Features Hermetically sealed glass encapsulated reed switch. Option of Remote or Integral control unit. Option of Remote Counter and Totalizer for volume calculation. Option of Intrinsically Safe Switch. Wall Mounted Ultrasonic Flow Meter https://www.jayceetech.net/wall-mounted-ultrasonic-flow-meter.htm https://www.jayceetech.net/wall-mounted-ultrasonic-flow-meter.htm Thu, 09 Jan 2020 00:00:00 +0530 Submersible Level Transmitter https://www.jayceetech.net/submersible-level-transmitter.htm https://www.jayceetech.net/submersible-level-transmitter.htm Thu, 09 Jan 2020 00:00:00 +0530 JAYCEEPRESS level transmitter is a standard and most economic transmitter applied in liquid level measuring. A high sensitivity piezoresistive silicon pressure chip is employed in the transmitter. Piezoresistive Silicon Chip Employed MEMS Technology Cable Ventilated Excellent long term stability Hart protocol selectable CE certificate   Typical Application Depth and level measurement in Wells Reservoirs Lakes Rivers Sewage treatment plant Water tank Ground water monitoring Surface water monitoring Vibrating Rod Point Level Switch https://www.jayceetech.net/vibrating-rod-point-level-switch.htm https://www.jayceetech.net/vibrating-rod-point-level-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 GeneralOur Vibrating Rod Level Switch is applied to free-flowing grains, solids, granular plastics, bulk solids in Silos, hoppers and Agriculture Machinery. We are the Vibrating Rod Level Switches manufacture in India.We use the best quality material in our products that is why we are the Vibrating Rod Level Switches manufacturer in India. Our experts use signal diamond blade, Rod, or Bridging Problem according to the needs of our users. You can see the different design in the same product. To see our different designs, we recommend downloading catalogue and seeing the designs before selecting the right option for you.Our product is completely based on the vibrating principle. This is a rod type product having concentric tube. Jayceetech is the well-known Vibrating Rod Level Switches supplier in India. The supply takes place only after thorough testing of products. Our market analyzer read and research the current market needs. The report is sent to our manufacturing department, and then, our technical engineers provide the solution for market problems. This way, we are spreading our name and fame worldwide. If there is any query, our technical support team is always available to help you out.Our product is completely based on the vibrating principle. This is a rod type product having concentric tube. Jayceetech is the well-known Vibrating Rod Level Switches supplier in India. The supply takes place only after thorough testing of products. Our market analyzer read and research the current market needs. The report is sent to our manufacturing department, and then, our technical engineers provide the solution for market problems. This way, we are spreading our name and fame worldwide. If there is any query, our technical support team is always available to help you out.Details Our product has the robust contribution and high sensitivity. Users can switch and select sensitivity as high, medium and low. Application Free flowing Grains, Solids. Granular Plastics and Bulk Solids in Silos. Hoppers and Agri-Machinery. Features Single “Rod” eliminates “Bridging Problems” faced in vibrating Fork Design. Robust Contribution and High Sensitivity. Vibrations produce “Self-Cleaning Effect” to counter material that may as here to Probe/Tank wall. Diamond profile prevents “Built-up” of Falling Solids. Site selectable sensitivity for “Very Light”, “Normal” and “Heavy” material. Choice of construction to suit various Bulk Densities, Ranges and Process Temperature n industrial Applications. No moving Parts, hence almost no maintenance. Our vibrating rod is a electromechanical vibrating probe level switch suitable for detecting level in hoppers. single vibrating rod as sensing element, suitable for free-flowing solids even grain size over 10 mm material, which is a size limitation for vibrating fork type level switch. Vibrating Rod Level Switch for solids is based on resonance -vibration principle. It is an all stainless-steel rod like construction having concentric tube construction kept in the resonance state by electronic circuit and piezo vibrator. The probe can be mounted horizontally or vertically in a bin, hopper at desired location. the probe selection depends upon the applications. Vibrating Fork Level Switch https://www.jayceetech.net/vibrating-fork-level-switch.htm https://www.jayceetech.net/vibrating-fork-level-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 The vibrating fork level switch we provide at Jaycee Technologies Pvt. Ltd uses a tuning fork that is piezoelectric-driven and displays a dramatic change when added to a liquid, in resonate frequency. A microprocessor-based electronic unit maintains the resonate state of the sensor, while it converts from dry to wet or vice versa. Reliable Vibrating Fork Level Switch Manufacturers in India The changes produced by a dry or a wet sensor are always kept under scrutiny in the resonant frequency and it is through a relay that the alarm is offered. The easy maintenance device we provide is designed around the principle of tuning fork to offer you detection for all control, monitoring, and alarm. To protect the pump to prevent overfill, our range of vibrating fork switches is just what you need. Radar Level Transmitters https://www.jayceetech.net/radar-level-transmitters.htm https://www.jayceetech.net/radar-level-transmitters.htm Thu, 09 Jan 2020 00:00:00 +0530 The radar level transmitter either uses high-frequency electromagnetic waves or radio in the GHz range. The range of radar level transmitter you get from Jaycee Technologies Pvt Ltd offers accurate liquid measurement and are apt for low dielectric constant media. Our range of radar level transmitters isn’t affected by any density change, of pressure, temperature, foam, conductivity, dielectric constant, and or turbulence in liquid. Most Preferred Radar Level Transmitter Suppliers in Pune You need not spend much time and effort on maintaining the radar level transmitters, given how there aren’t any moving parts in it. The performance can always rely on and for various requirements, you can choose the kind of antennas. Ultrasonic Level Transmitters https://www.jayceetech.net/ultrasonic-level-transmitters.htm https://www.jayceetech.net/ultrasonic-level-transmitters.htm Thu, 09 Jan 2020 00:00:00 +0530 Hydrostatic Level Transmitter https://www.jayceetech.net/hydrostatic-level-transmitter.htm https://www.jayceetech.net/hydrostatic-level-transmitter.htm Thu, 09 Jan 2020 00:00:00 +0530 Details Piezoresistive Silicon Chip used MEMS Technology Cable Ventilated Excellent long term stability Hart protocol optional CE certificate JAYCEEPRESS level transmitter is a standard and most economic transmitter applied in liquid level measuring. A high sensitivity piezoresistive silicon pressure chip is employed in the transmitter.Application Depth and level measurement in Wells Reservoirs Lakes Rivers Sewage treatment plant Water tank Ground water monitoring Surface water monitoring Capacitance Level Switch https://www.jayceetech.net/capacitance-level-switch.htm https://www.jayceetech.net/capacitance-level-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 Jayceetech is the leading Capacitance Level Switches manufacturer in India which provides the quality products to its customers. The best thing about our manufacturing is that it is completely focused on customer needs and satisfaction.Jayceetech is working hard to increase the reach of technology in every small area across the globe and at the least possible prices. We provide various switches and transmitter for particular usage. Amid all these, Capacitance Level Switch is used for liquid products.Details The finest efficiency of the products. Delivery of the products after checking, testing, and verifying the operational accuracy. Best results in the minimum cost. A complete manual guide containing the products’ descriptions. Money back guarantee of the product. GeneralJayceetech has come up with the something different in its products. Including above features, we provide always something extra to satisfy them fullest. This is why, we have created a catalogue that contains different designs, varied price ranges, multiple technical specifications, and much more so that the customer can choose easily and click the only that they require.You can expect the cost-friendly implementation of our products. In fact, our capacitance level switches require the supply voltage of 12 to 30 V Dc for operation. For the operational efficiency, users can control the temperature and adjust it according to their needs. Medium temperature is minus 20 to 100 degree Celsius, while in the special version of the products; you will get it up to 200 degree Celsius.Capacitance Level Switch is applied for various liquids and not limited to acids, acitone, CTC, feed water, diesel, oil fruit juice, milk, vine, and Ammonia Benzene. Evolving as the finest and best quality Capacitance Level Switches manufacturer in India, we have two major probe specifications in our product. We suggest insulated part for conductive material like water, acid based solution and other solutions of similar nature. And for non-conductive material like petrochemical and solvents, we suggest both insulated and non-insulated probes. According to the requirements, we use probe material of stainless steel rod, rope insulated partly or fully in the product according to the requirements.We are not only the  prominent Capacitance Level Switches supplier in India but also we are well-known manufacturer and exporter of capacitance level switches. The product has complex technical specifications which are very vivid in nature. But our technical experts handle it in the best way and cater the global market. Jayceetech is backed by best engineers in the industry. So, we are the synonym of quality and stay out of the crowd.Liquid Applications Acids Acitone Ammonia Benzine Feed water CTC Diesel Oils fruit juice Milk wine Probe Specifications Conductive material: Water based solutions. Acids, Based etc – only insulated probe are suggested. Non-Conductivity material: Mostly petrochemical and solvents – insulated or non- insulated probes can be used. Vibrating Fork Point Level Switches https://www.jayceetech.net/vibrating-fork-point-level-switches.htm https://www.jayceetech.net/vibrating-fork-point-level-switches.htm Level Switches Point Level Switches Thu, 09 Jan 2020 00:00:00 +0530 Chute Level Switch https://www.jayceetech.net/chute-level-switch.htm https://www.jayceetech.net/chute-level-switch.htm Thu, 09 Jan 2020 00:00:00 +0530 Jayceetech is leading manufacture of Chute level switch, boot, diaphragm level switch in India. We offer predominant Diaphragm Level Switch that is made up from quality material with perfect finishing. Known for its impeccable highlights, Diaphragm Level Switch is very popular among our clients. Boot level switch is applicable to detect the level in the bucket alligator boot & similar small hopers and ducts.We always want to be one step ahead in order to furnish the best technological equipment to the world. That is why we try to inculcate more and more features in our products. Points related to products that make a difference in our industry:Details Easy installation and mounting. Consists of micro switch inside Cast Al Housing. GeneralJayceetech is leading manufacturer of Chute level switch, boot and diaphragm level switch in India. We offer Diaphragm/Boot Level Switch is applicable to detect the level in the Bucket Elevator boot & similar small hoppers and ducts.Our Chute Level Switch is used for indicating, controlling, the level of granulated or powdered dry materials through the plant control system. It is applied to all free-flowing grains and powders but used for the solid items only.Our chute level switches have normal sensitivity in the range of 100 to 400gm depending upon the model. The ambient temperature is 60 Deg C. and special design suitable up to 150 Deg C. The main body of these switches is designed of cast aluminum along with the use of polymer switch housing. It is suitable for free flowing powder and grains like food grains. ApplicationsThe JAYCEEBOOT level switch is used for indicating, controlling, and regulating the level of granulated or powdered dry materials with a grain diameter up to 15mm and a density of 0,3 to 2,5 g/cm3, flowing through a silo, hopper or chute.Operation The device must be mounted so that the diaphragm membrane is exposed to the product whose level should be controlled, in such a way that the product, can press the diaphragm. The material weight presses the diaphragm which is adjusted with the micro switch through a flexible mechanism. A liver attached to the diaphragm transfers the pressure to the micro switch which changes the contact. When the material recedes the diaphragm comes back to its normal position and the micro switch again changes the contact. Level Position Switch https://www.jayceetech.net/level-position-switch.htm https://www.jayceetech.net/level-position-switch.htm Level Switches Thu, 09 Jan 2020 00:00:00 +0530